Panasonic KX-NS1000 Pc Programming Manual page 945

Feature Manual References
20.1.46 Unified Messaging—Incomplete Call Handling Service
Call Transfer Anytime in Incomplete Handling Menu
Specifies whether callers can input an extension number to transfer their call while the Automated Attendant
service is playing an Incomplete Call Handling menu.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
Notification Parameters
The Unified Messaging system is able to notify a subscriber when a new message is recorded in his or her
mailbox. There are 3 methods the system can use for notification:
–
Lighting the Message Waiting Lamp on the subscriber's extension telephone.
–
Calling a pre-programmed device (external telephone, etc.). A maximum of 3 devices (Device 1, 2, 3) can
be programmed per mailbox.
–
Sending an e-mail to a designated address.
Message Waiting Lamp
If set to "Enable", the Message Waiting Lamp of the subscriber's telephone turns on when a new message is
recorded.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Manual References
20.1.59 Unified Messaging—Message Waiting Notification—Lamp
Telephone Device
Specifies the Message Waiting Notification schedule for each device. The following parameters can be
specified for devices 1, 2, and 3. Click Edit for the extension to change, set Device Notification for
Unreceived Message to "Yes", and program the settings, then click OK to finish.
Document Version 2016-03
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
PC Programming Manual 945