Panasonic KX-NS1000 Pc Programming Manual page 939

Value Range
Max. 16 digits
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
PC Programming Manual References
26.1 UM Configuration—[7] System Security—Subscriber
Feature Manual References
20.1.66 Unified Messaging—Password Administration
Mailbox Password (Message Client)
Specifies the password needed to access the mailbox when using a client software program. If a default
password is programmed by an administrator, that password will be assigned automatically when creating all
mailboxes. Administrators can change and delete the password.
To change a password for a mailbox:
1.
On the Mailbox Parameters Screen, click Edit under Mailbox Password (Message Client) for the mailbox
extension to change.
2.
In the window that appears, enter the new password and then enter it again to confirm it.
3.
Click OK.
Default
Not stored
Value Range
4–16 characters (A–Z, a–z, 0–9)
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
PC Programming Manual References
26.1 UM Configuration—[7] System Security—Subscriber
Feature Manual References
20.1.66 Unified Messaging—Password Administration
Class of Service (Mailbox)
Determines the set of services available to the subscriber.
Note
•
We recommend that parameters for each COS number be defined before assigning a Class of Service
(COS) to each mailbox or creating new mailboxes.
Document Version 2016-03
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
PC Programming Manual 939