Toshiba Q9 Installation And Operation Manual page 204

Table 9. My Function — Input Function Command Operators.
Input
Function Function Name
Command
0 NOP (No Operation)
1 ST
2 STN
3 AND
4 ANDN
5 OR
6 ORN
7 EQ
8 NE
9 GT
10 GE
11 LT
12 LE
13 ASUB
14 ON (Timer)
15 OFF (Timer)
16 COUNT1 (Timer)
17 COUNT2 (Timer)
18 HOLD
19 SET
20 RESET
194
My Function Computational Selections
Disables the My Function feature.
Execute data read/transfer.
Execute inverted data read/transfer.
Logical product of A AND B.
Logical product of A AND B.
Logical sum of A OR B.
Logical sum of A OR B.
Compares data — Outputs 1 if Equal; 0 if not Equal.
Compares data — Outputs 0 if Equal; 1 if not Equal.
Compares data — Outputs 1 if A>B; 0 if A
Compares data — Outputs 1 if A
Compares data — Outputs 1 if A
Compares data — Outputs 1 if A
Outputs absolute difference between A and B — |A–B|
Enables the On response time delay settings of My Function Time Data 1 – 5
(F928 – F932) for My Function Data.
Enables the Off response time delay settings of My Function Time Data 1 – 5
(F928 – F932) for My Function Data.
Outputs a 1 upon reaching the pulse count setting of F933.
Outputs a 1 upon reaching the pulse count setting of F934.
Outputs the peak output value since powering up or since the last reset.
Sets data.
Resets data.
Function Description
≤
B.
≥ <
B; 0 if A B.
< ≥
B; 0 if A B.
≤
B; 0 if A>B.
Q9 ASD Installation and Operation Manual