Access Range; Precautions; Preparing Profile Data; Operations For Display - Mitsubishi Electric GOT2000 Series User Manual

22.2.2

Access range

The access range is the same as when the GOT is connected to a controller.
For the details of the access range, refer to the following.
➠
22.2.3

Precautions

■1. Precautions for the device list information screen and parameter information screen
While the following operations are in progress, do not perform operations that use the control signal (Y signal).
• Updating information by using the [Update list] key on the device list information screen
• Reading or writing parameters by using the [Read parameters] key or [Write parameters] key on the parameter
information screen

22.3 Preparing profile data

To display iQSS-compatible devices with the iQSS utility, store profile data in a data storage with GT Designer3 and mount
the storage on the GOT.
For information on how to store profile data, refer to the following.
➠

22.4 Operations for Display

This section explains the procedure to display the operation screen of the iQSS utility.
Step 1.
Mount a data storage in which profile data is stored on the GOT.
Step 2.
Turn on the GOT.
Step 3.
Display the iQSS utility screen by one of the following methods.
• Starting from the special function switch (iQSS utility) set in the project
For information on how to set special function switches, refer to the following.
➠
• Starting from the utility
In the utility, touch [Monitor] → [iQSS utility] from the main menu.
For information on how to display the utility, refer to the following.
➠
Step 4.
The [Select channel] window appears only at the first startup of the iQSS utility.
Set the channel number of the PLC connected to the GOT.
When the channel number is not set, touching the [×] key closes the [Select channel] window and sets the
channel number to [1].
22 - 4
22.3 Preparing profile data
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
GOT2000 Series User's Manual (Utility)
Select channel key
[Select channel] window