Present Value Monitor Screen - Mitsubishi Electric GOT2000 Series User Manual

3) [Error List Axis] key
Displays the latest errors that occurred on the specified axis.
➠
16.4.6 Error list designated-axis screen
4) [Positioning Monitor] key
Monitors the details of the positioning data set to any axis.
➠ 16.4.7 Positioning monitor screen
5) [Servo Monitor] key
Monitors the servo monitor/servo amplifier.
➠ 16.4.8 Servo monitor screen
6) [Present Value Hist.] key
Displays the history of encoder present values, servo command values and monitor present values of the ABS
axis at servo amplifier power-on/off or at home position return.
➠ 16.4.9 Present value history monitor screen
16.4.4

Present value monitor screen

This section describes the structure of the screen and the common operations when the present value monitor is executed.
■1. Display contents and key functions
The following describes the display data of the present value monitor screen and the functions of the keys displayed on
the screen.
(1) Displayed contents
1) [Ax]
Displays the axis numbers of the operating axes being monitored.
2) [Feed PV] and [Actual PV]
Displays the feed present values or actual present values of the operating axes.
Touching the display part of the monitored value switches to the positioning monitor screen of the touched axis
number.
➠
16.4.7 Positioning monitor screen
3) [SV RDY], [ERR DT], and [SV ERR]
Displays the ON (lit)/OFF (not lit) status of the servo ready signal, major/minor error and servo error detection
signal.
Touching the error indication part [○] switches to the Error List Designated-Axis screen of the touched axis
number.
➠ 16.4.6 Error list designated-axis screen
4) Bit device screen
The common bit devices are always monitored and displayed.
• Bit devices for error detection: marked with a red circle
• Bit devices for general status display: marked with a green circle
1) 2) 3) 4)
16.4 Operation Procedures
16
16 - 11