X150 P1/P2 Profinet - Siemens S120 Manual

Control Units, Control Unit Adapters and operating components
7.3 Control Unit CU310-2 PN (PROFINET)
7.3.2.11

X150 P1/P2 PROFINET

Table 7- 12 X150 P1 and X150 P2 PROFINET
Pin
1
2
3
4
5
6
7
8
Connector type: RJ45 socket
Data rate: 100 Mbits or 10 Mbits
Note
The PROFINET interfaces support Auto MDI(X). It is therefore possible to use both crossed
and uncrossed cables to connect the devices.
For diagnostic purposes, the two PROFINET interfaces are each equipped with a green and
a yellow LED. The table shows the status information these indicate.
Table 7- 13 LED states on the X150 P1/P2 PROFINET interface
LED Color
Link port -
Green
Activity port -
Yellow
278
Signal name
RXP
RXN
TXP
Reserved, do not use
Reserved, do not use
TXN
Reserved, do not use
Reserved, do not use
Status Description
OFF Missing or faulty link
Continuous 10 or 100 Mbit link available
light
OFF No activity
Flashing Data is being received or sent at port x
Technical data
Receive data +
Receive data -
Transmit data +
-
-
Transmit data -
-
-
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
AC Drive