Network Filtering - GE D90 Plus Instruction Manual

Line distance protection system

Hide thumbs Also See for D90 Plus:

Table of Contents

CHAPTER 6: COMMUNICATIONS

Network filtering

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

Select the Settings > Communications > Network > HTTP menu item to open the HTTP

configuration window.

Figure 80: HTTP configuration settings

The following settings are available.

HTTP TCP Port Number

Range: 1 to 65535 in steps of 1

This setting specifies the TCP port number for the embedded web server. This setting

takes effect upon restart of the D90

Web Server Function

Range: Disabled, Enabled

Default: Disabled

This setting enables and disables the web server feature.

Do not set more than one protocol to the same TCP/UDP port number, as this results in

unreliable operation of those protocols.

Select the Settings > Communications > Network > Filtering menu to open the network

filtering configuration window.

Figure 79: Sample web access page

NETWORK SETTINGS