Table of Contents
Advertisement
Indicator lights in the display
Problem
The alarm symbol
; lights up and
the 3 sensors for
the wine
conditioning zones
are flashing. An
audible alarm will
also sound.
The alarm symbol
; and the sensor
for 1 wine
conditioning zone
are flashing. An
audible alarm is
also sounding.
The indicator light
— for changing the
charcoal filters
lights up.
A bar lights up or
flashes in the
temperature
display.
"F1" to "F3" or "S1"
to "S9" will appear.
Possible cause
The door alarm has been
triggered.
The zone concerned is
either too warm or too cold,
regardless of the set
temperature. This can occur
if:
– the appliance door has
been opened too
frequently,
– the ventilation gaps are
blocked,
– there was a power failure
for a long period of time.
This is the prompt to
change the active charcoal
filters.
Only temperatures within
the range the appliance can
display will be shown.
There is a fault.
Problem solving guide
Remedy
^ Close the appliance door.
The 3 sensors for the wine
conditioning zones and
the alarm symbol ; will
go out.
^ Deactivate the alarm. The
alarm symbol ; will go
out and the sensor for the
zone concerned will light
up constantly.
The audible alarm will
stop.
^ Replace the active
charcoal filter in each of
the 3 wine conditioning
zones and then confirm
the filter change in the
settings mode (see "Active
charcoal filter").
^ Call Miele.
43
Advertisement
Table of Contents
