Alarms - Miele 09 507 300 Operating And Installation Instructions

Wine conditioning unit
Table of Contents

Advertisement

Alarms

Your appliance is fitted with a warning
system which ensures that the
temperature in the three zones cannot
rise or fall unnoticed and impair the
wine.
Temperature alarm
If the temperature in one of the zones
gets too warm or too cold, the sensor
for the zone concerned will flash in the
control panel. The alarm symbol ; will
flash in the display at the same time
and an audible alarm will also sound.
The alarm will sound and the alarm
symbol will flash, for example, if:
– you switch on the appliance and the
temperature in one of the zones
deviates too greatly from the set
temperature,
– the door has been left open for a
while in order to rearrange or take
wine bottles out and warm air has
entered the appliance,
– a large number of wine bottles are
put into the storage unit at once,
– there has been a power cut.
The alarm will stop and the alarm
symbol ; in the display will go out
again as soon as the temperature has
reached the correct level again. The
sensor for the zone concerned will light
up again constantly.
28
Switching off the alarm early
If the noise disturbs you, you can
switch the alarm off early if you wish.
^ Touch the sensor to switch off the
temperature alarm.
The alarm will stop.
The sensor for the corresponding zone
and the alarm symbol ; will continue
to flash until the temperature has
reached the correct level again.
Safety measures in the case of low
ambient temperatures
To protect wine from low temperatures,
a safety thermostat ensures that the
temperature in the appliance cannot fall
dramatically. If the ambient temperature
drops, a heater in the appliance
switches on and holds the temperature
within the appliance constant. If the
ambient temperature continues to drop,
the appliance will automatically switch
itself off.

Advertisement

Table of Contents
loading

Table of Contents