Table of Contents
Advertisement
Cleaning and care
^ Only use clean water to clean the
magnetic strips on the front of the
shelves. Do not use cleaning agents
as these will damage the blackboard
paint.
^ The Original Miele Care product for
stainless steel can be used internally
and externally on stainless steel
surfaces of the appliance (available
from Miele or at
www.miele-shop.com, depending on
country).
This product contains substances
that are gentle to stainless steel
surfaces and, unlike stainless steel
cleaners, it does not contain
polishing agents. Soiling is gently
removed and each time the Original
Miele Care product for stainless steel
is used, it forms a protective film
against dirt and water.
^ Apply the Original Miele Care
product for stainless steel to the
external side panels each time after
cleaning.
Each time this product is used it
forms a protective film against dirt
and water. The stainless steel surface
will be protected against resoiling for
a period of time.
^ Clean the appliance door with a
proprietary glass cleaner.
38
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Door seal
Do not use any oils or grease on the
door seals as these will cause the
seal to deteriorate and become
porous over time.
^ The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Rear of appliance - metal grille
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
After cleaning
^ Replace all shelves and accessories
back in the appliance.
^ Reconnect the appliance to the
electricity supply and switch it on.
^ Place the wine bottles back in the
appliance and close the door.
Advertisement
Table of Contents
