Carriage 1 - Toshiba 1550 Service Manual

Exposure lamp:
(1) While pushing the lamp toward the front (A),
disengage it from the supply blade.
Notes: 1. During replacement, don't touch the
lamp surface with a bare hand.
2. Be careful not to allow the lamp to get
scratched by the wire.
Thermofuse:
(1) Remove two screws.
7.3.7

Carriage 1

(1) Remove the supply cable's harness clamp and
disconnect one connector.
1550/1560 OPTICAL
Thermofuse
Front
Rear
side
side
Teflon tube
7 - 10
Carriage drive wire
Rear side
Harness clamp
View as seen from the exit side
Exposure lamp
Thermofuse
Carriage 1
Supply cable
Mar. 1998 © TOSHIBA