Sony FDR-X3000 Read This First Manual page 61

Press the UP button or DOWN button to select
2
(HDMI settings) - setting item, then press the REC/ENTER button.
The set items and details are as follows.
: Sets the output resolution of the HDMI signal.
: Sets the HDMI resolution signal automatically.
(FDR-X3000): Sets the HDMI resolution signal to 2160p.
: Sets the HDMI resolution signal to 1080p.
: Sets the HDMI resolution signal to 1080i.
: Sets the HDMI resolution signal to 720p.
: Sets the output HDMI signal frame rate.
: Output HDMI signal is 60p.
: Output HDMI signal is 24p.
Available only when in movie mode (not available when playback).
*
* This setting is disabled when image quality setting is set to a setting other than 1080 24p.
* This setting is disabled when the HDMI resolution is set to a setting other than 1080.
: Sends the time code or the user bit information to a device connected with HDMI (FDR-
X3000).
: Sends the time code or user bit information.
: Does not send the time code or user bit information.
* Unavailable when movie format is set to MP4.
: Controls the recording on a device connected with HDMI (FDR-X3000).
: Controls the recording on the device.
: Does not control the recording on the device.
* Unavailable when movie format is set to MP4.
Note
Available for external recorders/players compatible with
When is
Depending on the settings and the condition of an external recorder/player, it may not work properly, even
when for the camera is set to
[59] Changing the Settings
USB power supply
, is set to .
. Confirm that it works before using it with the camera.
Camera settings
(Camera Settings) -
.