[57] Changing the Settings
IR remote (FDR-X3000)
You can start/stop recording and initialize the time code using the infrared remote control (sold
separately).
Press the MENU button.
1
Press the UP button or DOWN button to select
2
remote) - setting value, then press the REC/ENTER button.
(Allows you to operate the camera using the infrared remote control)
(Prevents operation of the camera using the infrared remote control)
Note
The remote commander & IR receiver kit RMT-VP1K and RMT-845 (sold separately) are required to use this
function.
Purchase a RMT-845 at a Sony service center.
You can operate only the following settings using the RMT-845 (sold separately). Other settings are
inoperable.
Initialize the time code.
When initializing the setting, the REC lamp blinks in blue for about 5 seconds.
Start/stop recording.
[58] Changing the Settings
HDMI settings (FDR-X3000/HDR-AS300)
Set the HDMI output signal.
Press the MENU button.
1
Camera settings
Camera settings
(Camera Settings) -
(IR