How To Avoid Moisture Condensation; Notes On Optional Accessories; Note On Disposal/Transfer Of The Memory Card - Sony FDR-X3000 Read This First Manual

When you bring the camera from an air conditioned car or room into a hot place outside.
When you use the camera after a squall or a shower.
When you use the camera in a hot and humid place.

How to avoid moisture condensation

When you bring the camera from a cold place into a warm place, put the camera in a plastic bag and
seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached the
ambient temperature (after about 1 hour).
[114] Information

Notes on optional accessories

Genuine Sony accessories may not be available in some countries/regions.
[115] Information
On using the camera in close proximity to vibrating
motors and engines (FDR-X3000/HDR-AS300)
Distortion in image quality or out-of-focus may occur when used in close proximity to vibrating
motors and engines.
In this case, Motor Vibration Absorber for X3000/AS300 "AKA-MVA" (accessory sold separately,
available in autumn 2016) helps minimize distortion or out-of-focus.
[116] Information

Note on disposal/transfer of the memory card

Even if you delete data in the memory card or format the memory card on the camera or a computer,
you may not delete data from the memory card completely. When you give the memory card to
somebody, it is recommended that you delete data completely using data deletion software on a
computer. Also, when you dispose of the memory card, it is recommended that you destroy the actual
body of the memory card.
Precautions
Precautions
Precautions