To Shoot Successfully In Motion Shot Le Mode; To Shoot Successfully In Burst Shooting Mode - Sony FDR-X3000 Read This First Manual

FDR-X3000/HDR-AS300: 12.0 M (Angle setting:
(Angle setting:
HDR-AS50: 11. 9 M (Angle setting:
(Burst shooting. Shoots at the interval set in the
(HDR-AS50) (Still image shooting interval).)
Image size
FDR-X3000/HDR-AS300: 12.0 M (Angle setting:
(Angle setting:
HDR-AS50: 11.9 M (Angle setting:
(Motion Shot LE. Generates a still image from the still images continuously shot at the
interval set in the
interval).)
Image size
FDR-X3000/HDR-AS300: 2.1 M
HDR-AS50: 3.0 M

To shoot successfully in Motion Shot LE mode

Try the following shooting methods.
Stabilize the camera to prevent camera shake.
Use the remote control function with a smartphone or Live-View Remote, or the self-timer
function to prevent camera shake for better results.
Make sure that the moving objects are not too large or too many.
Shoot in a bright location and avoid changes in brightness.

To shoot successfully in burst shooting mode

Try the following shooting methods.
Stabilize the camera to prevent camera shake.
Use the remote control function with a smartphone or Live-View Remote, or the self-timer
function to prevent camera shake for better results.
Note
If automatic generation in Motion Shot LE mode fails, [05-06] is displayed on the display panel. Depending
on the display timing of [05-06], the image may not be saved.
After shooting with Burst Shooting or Motion Shot LE mode, there is a processing time during which the next
operation cannot be operated.
Only one still image can be transferred to the smartphone.
(In burst shooting mode, the last still image can be transferred. In Motion Shot LE mode, the generated
image can be transferred.)
[33] Changing the Settings
)
)
(FDR-X3000/HDR-AS300)/
Shooting settings
) /6.1 M (Angle setting:
)/7. 0 M (Angle setting:
) /6.1 M (Angle setting:
)/7.0 M (Angle setting:
)
(FDR-X3000/HDR-AS300)/
)
(HDR-AS50) (Still image shooting
) /3. 0 M
) /3.0 M