Time-Lapse Shooting Interval - Sony FDR-X3000 Read This First Manual

Press the UP button or DOWN button to select
2
(Self-timer) - setting item, then press the REC/ENTER button.
(Does not use self-timer)
(Sets the self-timer to 2-second)
(Sets the self-timer to 10-second)
Note
You cannot use self-timer when recording movies.
The self-timer function is enabled until it is cancelled. Set the self-timer to
[35] Changing the Settings

Time-lapse shooting interval

You can set the interval of the time-lapse shooting.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
setting) -
REC/ENTER button.
(Continues to record still images at about 1-second intervals)
(Continues to record still images at about 2-second intervals)
(Continues to record still images at about 5-second intervals)
(Continues to record still images at about 10-second intervals)
(Continues to record still images at about 30-second intervals)
(Continues to record still images at about 60-second intervals)
Note
The first photo is recorded immediately when recording starts, without waiting for the completion of the set
interval. The second and subsequent still images are recorded at the set intervals.
Depending on your shooting condition, the speed may not reach the set speed.
Shooting settings
(Time-lapse shooting interval) - setting value, then press the
(Photo mode setting) -
after you finish using it.
(Time-lapse capture mode