Table of Contents
Advertisement
Problem
The first time you cook with
steam, there is a lot of steam
When cooking with steam, there
is again a lot of steam
Steam escapes from the
ventilation slots during cooking
The appliance is not producing
steam properly
An error message "E..." appears
in the display
Error message "E011" appears
in the display
The appliance is not heating.
"Demo" is shown in the display
48
Possible cause
The appliance is being
automatically calibrated
The appliance is unable to
calibrate itself automatically if
cooking times are too short
Limescale has formed in the
appliance
Technical fault
A button was pressed for too
long or is jammed
A button combination was
actuated
Notes/remedy
This is normal
Set the appliance back to factory
settings (see Basic settings
section). Then start steaming for
20 minutes at 100 ºC
This is normal
Start the descaling programme
Press the 0 button to delete the
error message. Reset the clock if
required.
If the error message appears
again, call the after sales service
Press the 0 button to delete the
error message.
Press all of the buttons individually
and check if they are clean
Interrupt the power supply and
reconnect after 10 seconds.
Within 2 minutes, press button D
for 4 seconds
Advertisement
Table of Contents
