Table of Contents
Advertisement
Cleaning
Heating up the appliance
Cleaning the accessories
before use
4. Change the water hardness range using the rotary
selector. Possible values:
softened
1 soft
2 medium
3 hard
4 very hard
5. Press the ± button to leave Basic settings.
The change is stored.
Heat up the appliance empty before first use and
clean the accessories.
1. Press the # button to switch on the appliance.
The "Steam" operating mode appears after
approx. 4 seconds.
2. Press the Start button.
The appliance automatically heats up to 100 ºC
and switches off after 20 minutes. A signal sounds.
3. Press the Stop button to stop the operation.
Leave the appliance door ajar until the appliance has
cooled down.
Clean the accessories thoroughly before first use
using a cloth and soapy water
I
II
III
IV
15
Advertisement
Table of Contents
