LG LDK24 ADSL Router User Manual page 42

LDK24 ADSL Router User's Manual
f. Enter details about the IP address of your PC in the dialog box.
If you are allocating a fixed IP address to the LDK24 System, choose Use the
following IP address and enter the following details: IP address, Subnet mask, Default
gateway.
Note :If you have setup NAT on LDK24 system, you must allocate private IP address
to your PC(ex, 192.168.100.100)
If you have setup DHCP Server on the LDK24 System, you can choose the setting
Obtain an IP address automatically.
Enter details about the DNS server allocated from your ISP or Telco you will be using,
g.
if you will be connecting the your PC to the Internet.
Note : If you have setup 3.3.3 Ethernet - PPP routed(PPPoA) or 3.3.4 Ethernet –
PPPoE routed(PPPoE), you can alternatively use the IP address of DNS
Primary/Secondary obtained by PPP
Click on OK.
h.
Click on OK again to close the remaining open dialog box. The Ethernet driver has now
i.
Copyright© 2002 LG Electronics Inc., LTD.
Version 1.0D
<figure -pc-network4>
Page 42 of 67