Ethernet - Ppp Routed - LG LDK24 ADSL Router User Manual

h. In order to add a default route, From the left-hand menu, click on Configuration>IP
routes. Click on the Create new IP V4Route link. The Create IP V4Route page is
displayed. In the Gateway text box, type default gateway address(for example,
192.168.102.3). You do not need to change the other default settings. Click on OK.
Refer to the figure-12.
3.3.3 Ethernet – PPP routed
You can set "PPP routed(PPPoA)" by following instructions.
a. From the left-hand menu, click on Configuration>WAN connections
Refer to the figure-5.
b. When you click on Configuration>WAN connections., if asking for username and
password, type username "admin" and password "admin".
Refer to the figure-6.
c. The WAN connections page is displayed. If there are any connections listed, click on the
Delete hyperlink, then click on Delete this connection. Repeat until all WAN
connections have been deleted like the picture below.
Refer to the figure-7.
From the left-hand menu, click on Configuration>IP routes. If there are any routes
d.
listed, check the Delete? checkbox and click on Apply. Repeat until all IP routes have
been deleted.
LDK24 ADSL Router User's Manual
Version 1.0D
<figure -14>
Copyright© 2002 LG Electronics Inc., LTD.
Page 23 of 67