Toshiba GRE110 Instruction Manual page 339

ID Description
Ct11 How to force a "test-not-ok" respond
with Select request?
Ct12 How to force a "test-not-ok" respond
with Operate request?
Ct13 Which origin
supported?
Ct14 What happens if the orCat is not
supported?
Ct15 Does the
SelectWithValue/Operate with the same
ctlVal as the current status value?
Ct16 Does the IED accept a select/operate
on the same control object from 2
different clients at the same time?
Ct17 Does the
Select/SelectWithValue from the same
client when the control object is already
selected (tissue 334)
Ct18 Is for SBOes the internal validation
performed during the SelectWithValue
and/or Operate step?
Ct19 Can a control operation be blocked by
Mod=Off or Blocked
Ct20 Does the IED support local / remote
operation?
Ct21 Does the
InformationReport with LastApplError
as part of the Operate response- for
control with normal security?
categories are
IED accept a
IED accept a
IED send an
 340 
Value / Clarification
N.A.
DOns, SBOns:
Set orCat with unsupported value.
DOes, SBOes: N.A.
N
DOns, SBOns:
"test-not-ok" IED respond
DOes, SBOes: N.A.
DOns, SBOns: N
The control request is rejected by IED with
AddCause "Blocked-by-Interlocking".
DOes, SBOes: N.A.
DOns,: Y
SBOns: N
DOes, SBOes: N.A.
SBOns: N
SBOes: N.A.
N.A.
Y
Y
DOns: N
SBOns: Y
6 F 2 T 0 1 7 2