Setting The Leds Color; Selection Of Virtual Leds - Toshiba GRE110 Instruction Manual

Assigning signals
• Select "Functions" on the "LED∗" screen to display the "Functions" screen.
/ 5
I n
> I
I
I
I
• Assign signals to gates (In #1 to #4 of "---") by entering the number corresponding to each
signal referring to Appendix B.
Note: If signals are not assigned to all the gates #1 to #4, enter 0 for the unassigned gate(s).
• Press the END key to return to the "LED∗" screen.
Repeat this process for the outputs to be configured.

Setting the LEDs color

•
Select "LED color" on the "LED∗ " screen or on the "CB CLOSED" screen to display the
"LED color" screen.
/ 5
C o
> C o
R /
• Select the LED colors of red , green or yellow.
• Press the END key to return to the "LED∗" screen.
Repeat this process for the LED colors to be configured.

Selection of virtual LEDs

• Select "Virtual LED" on the "/2 LED" screen to display the "Virtual LED" screen.
/ 3
> I
I
• Select the IND number and press the ENTER key to display the "IND∗" screen.
F u n c t i o n s
♯ 1
n ♯ 1
－ － －
n ♯ 2
－ － －
n ♯ 3
－ － －
n ♯ 4
－ － －
L E D C o l o r
l o r
l o r
G / Y
V i r t u a l
N D 1
N D 2
 142 
_
_
0
L E D
6 F 2 T 0 1 7 2