System Settings - Bosch CCS 1000 D Operation Manual

Digital Discussion System
7.4.6

System settings

Preconditions:
–
Click the System settings button on the homepage to open the system settings page.
Figure 7.6: CCSD‑CURD system settings
Users
Click the Users button on the system settings page to open the user settings page:
This page is used to enter and modify user information and rights.
–
–
–
–
–
For each (new) user, the following can be entered or selected:
–
–
Bosch Security Systems B.V.
To access System settings and change parameters, the logged on user must have the
access right: Configure and/or Modify users.
To add a user, click the + button to open the 'add new user' screen.
To change a user's name, select the user (the dark grey color means selected), and then
use the panel on the opposite side of the page to make changes.
To change a user's password, select the user, and then click the 'change password'
button.
To change a user's rights, select the user, and then click the required 'user rights' button.
To remove a user, select the user, and then click the recycle bin.
General: Enter First name, Last name, Username, Password (may be empty).
User rights: select the required user right (grey means selected):
– Manage meeting: This right gives access to the manage discussion and manage
recorder pages, and volume control. Refer to Manage discussion, page 42 or Manage
recorder, page 44.
– Prepare meeting: This right gives access to the prepare discussion pages. Refer to
Prepare discussion, page 43.
– Modify users: This right gives access to the users page.
Operation manual
Configuration | en 45
2016.05 | V2.0 |