Sharp AX-1600R Operation Manual page 71

TROUBLESHOOTING CHART
The following situations are normal and are not signs that the oven is malfunctioning.
QUESTION / SITUATION
The display is black / blank.
Control panel /
power supply
The display is fi ne but START
will not function when pressed.
E l e c t r i c a l p o w e r s u p p l y i s
interrupted during cooking.
Oven light is off during PROOF
mode.
O v e n l i g h t i s o f f d u r i n g
descaling.
Oven light is off when door is
opened.
AX1600 En,P21-29 27 AX1600 En,P21-29 27
ANSWER
* Open the door and close.
* Check the power plug is properly connected to a
suitable wall outlet.
* Check the wall socket and fuse are functioning properly.
* Disconnect the power cord, wait for a minute, then
reconnect.
* Open the door and close. Is the oven light off? Press
START again.
* If the message "Wait. Oven is too warm to use." is
displayed, wait until the message has disappeared.
The programmed cooking time and mode will be cancelled.
Continue to cook with manual mode.
Normal operation to prevent bread dough from drying on
the surface.
This is normal operation. See page E-8.
Oven light will turn OFF if the door is open for more than
5 minutes.
E – 27
15/08/06 16:52 15/08/06 16:52