HP P2000 G3 MSA Reference Manual page 51

423
Error Failed to remove the indicated volume from the indicated replication set. This can occur for several
reasons, such as:
• The volume record is not found.
• The volume record is not yet available.
• A primary volume conflict exists.
• You cannot delete the volume from a remote system.
• You cannot remove the volume because it is the primary volume.
Recommended actions
• If any of the above problems exist, resolve them. Then repeat the remove operation with a valid volume.
424
Info. Completed modifying parameters for the indicated secondary volume in the indicated replication set.
Recommended actions
• No action is required.
425
Info. Started a replication to the indicated secondary volume.
Recommended actions
• No action is required.
426
Info. Completed a replication to the indicated secondary volume.
Recommended actions
• No action is required.
427
Warning A communication error occurred when sending information between storage systems.
Recommended actions
• Check your network or fabric for abnormally high congestion or connectivity issues.
428
Info. A user suspended a replication to the indicated secondary volume.
Recommended actions
• No action is required.
429
Info. A user resumed a replication to the indicated secondary volume.
Recommended actions
• No action is required.
430
Info. A user aborted a replication to the indicated secondary volume.
Recommended actions
• No action is required.
HP P2000 G3 MSA System Event Descriptions Reference Guide 51