Panasonic KX-TD500 System Reference Manual page 276

c) Voice Mail Transfer Key and Forward to VM Sequence.
A PITS telephone user can transfer a call to the voice mail system by simply pressing the "VM TRANS"
key which is assigned to a DN key. When the user pressed the "VM TRNS" key and the extension
directory number while talking, the KX-TD500 transfers the call to the voice mail system and sends the
"Forward to VM Sequence" defined by system programming.
#
Ext. A
# Ext. A is having a
conversation with B.
Ext. A
'
' Ext. C can retrieve its own
message by simply pressing
the MESSAGE button.
*The "Forward to VM Sequence" uses "#6 + Follow on ID" as a default. This default sequence
is for the KX-TVP series Voice Processing System. If you use another voice mail system,
you have to adjust this sequence for the VPS which you are using.
This parameter is programmed by the dumb command "VMC". Refer to Section 11-C-65.00
"Voice Mail Service Command (VMC)".
Ext. B
Ext. C
VPS
Ext. B
Ext. C
VPS
Ext. A
$ Press the "VM TRNS" key and dial the
directory number of Ext. C.
(The KX-TD500 transfers the call to the
VPS with the "Forward to VM Sequence".)
% Ext. A can record a message for Ext. C.
& The MESSAGE button of Ext. C is turned on.
3-F-16
$
Ext. B
&
%
Ext. C
VPS