Yamaha Aventage RX-A1050 Owner's Manual page 88

■
Connecting an HDMI-compatible device to play back
videos/audio
Connect an HDMI-compatible device (such as a TV) to play back videos/audio at
Zone2.
• To watch videos played back on a video device at Zone2, you need to connect the video device to the unit
with an HDMI cable (p.30).
• We recommend that you disable HDMI Control on the playback devices connected to the unit.
• On-screen operations are not available for Zone2.
HDMI OUT 2
(ZONE OUT) jack
The unit (rear)
HDMI OUT
HDMI OUT
(HDCP2.2)
(HDCP2.2)
2 1 AV 1
2
(ZONE OUT) ARC (1 B
(ZONE OUT)
HDMI
AV 1 AV 2 AV 3 AV 4
(1 BD/DVD)
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
L
R
ZO
1 2 3 4 5 6
GND OPTICAL OPTICAL COAXIAL COAXIAL COAXIAL OPTICAL
ANTENNA
(4 RADIO)
FM AM
75Ω
Main zone
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2, set "HDMI OUT2 Assign"
(p.125) in the "Setup" menu to "Zone2".
(Example: using a TV)
HDMI input
HDMI
HDMI
Zone2
En
• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output
from the HDMI OUT 2 jack by setting "Audio Output" (p.120) in the "Setup" menu to "On" or "Off" (default).
• You can also use speakers placed in Zone2 to output audio (p.25).
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings
88