Bluetooth - Yamaha Aventage RX-A1050 Owner's Manual

Bluetooth

Problem
A Bluetooth connection cannot be established.
No sound is produced, or the sound is
interrupted during playback.
Cause
Bluetooth
The function of the unit is disabled.
Another Bluetooth device is already connected to the unit.
The unit and the Bluetooth device are too far apart.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
Bluetooth
The device does not support A2DP.
The connection information registered on the
not working for some reason.
The volume of the Bluetooth device is set too low.
The Bluetooth device is not set to send audio signals to the unit.
The Bluetooth connection has been terminated.
Bluetooth
The unit and the device are too far apart.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
En
Remedy
Bluetooth
Enable the
Terminate the current
(p.69).
Move the Bluetooth
Move the unit away from those devices.
Bluetooth
Use a device that supports A2DP.
Bluetooth
device is Delete the connection information on the
connection between the
Turn up the volume of the
Switch the audio output of the
Establish a Bluetooth
(p.69).
Bluetooth
Move the
Move the unit away from those devices.
142
function (p.123).
Bluetooth
connection and then establish a new connection
device closer to the unit.
Bluetooth
device, and then establish a
Bluetooth
device and the unit again (p.69).
Bluetooth device.
Bluetooth device to the unit.
connection between the Bluetooth device and the unit again
device closer to the unit.