Yamaha Aventage RX-A1050 Owner's Manual page 51

1 2 3 4 5 6 7 8 9 10 11
z
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7 V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 PHONO PHONO
TUNER TUNER BLUETOOTH BLUETOOTH USB USB NET NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV NET NET RADIO RADIO
MUTE MUTE VOLUME VOLUME
PROGRAM PROGRAM
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 8 8
9 9 0 0 MEMORY MEMORY ENT ENT
■
C: Using other connection methods
If your wireless router (access point) does not support WPS push
button configuration method, follow the procedure below to
configure the wireless network settings.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press ON SCREEN.
4
Use the cursor keys to select "Setup" and press
ENTER.
5
Use the cursor keys (e/r) to select "Network".
6
Use the cursor keys (q/w) to select "Network
Connection" and press ENTER.
7
Use the cursor keys (q/w) and ENTER to check
"Wireless (Wi-Fi)" and select "OK".
• The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to select the
desired connection method and select "NEXT".
The following connection methods are available.
WPS Button
Share Wi-Fi
Settings (iOS)
Access Point
Scan
Manual Setting
PIN Code
51
En
You can set up a wireless connection with the WPS
button while viewing the TV screen. Follow the
instructions displayed on the TV screen.
See "Sharing the iOS device setting" (p.48).
You can set up a wireless connection by searching
for an access point. For details on settings, see
"Searching for an access point" (p.52).
You can set up a wireless connection by entering
the required information (such as SSID)
manually. For details on settings, see "Setting up
the wireless connection manually" (p.52).
You can set up a wireless connection by entering
the unit's PIN code into the wireless router (access
point). The method is available if the wireless
router (access point) supports the WPS PIN code
method. For details on settings, see "Using the PIN
code" (p.53).