Yamaha Aventage RX-A1050 Owner's Manual page 100

Hi-Res Mode (HiRes Mode)
Enables/disables the high-resolution mode when "Enhancer" is set to "On". If this
function is set to "On", you can enhance the quality of uncompressed digital audio
(such as 2-channel PCM and FLAC) using Compressed Music Enhancer.
Settings
Enables the high-resolution mode.
On (On)
(The high-resolution mode may not work depending on the audio
signal processing condition.)
Off (Off) Disables the high-resolution mode.
■
Video Processing (Video Process.)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in "Processing" (p.119) in the "Setup" menu.
Settings
Direct (Direct) Disables the video signal processing.
Processing
Enables the video signal processing.
(Processing)
■
Input Settings (Input Settings)
Configures the input settings.
• This setting is applied separately to each input source.
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Audio Select (A.Sel)
Selects the audio input jack to use when more than one audio connection is made
for one input source.
Settings
Automatically selects the audio input jack in the following priority order.
1. HDMI input
Auto (Auto)
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
Always selects HDMI input. No sounds are produced when no signals
HDMI (HDMI)
are input through the HDMI jack.
Always selects digital input (COAXIAL or OPTICAL). No sounds are
Coax/Opt (Coax/Opt) produced when no signals are input through the COAXIAL or OPTICAL
jack.
Always selects analog input (AUDIO). No sounds are produced when
Analog (Analog)
no signals are input through the AUDIO jacks.
Video Out (V.Out)
Selects a video to be output with the audio input source.
Settings
Off (Off) Does not output video.
AV 1–7 (AV1–7),
Outputs video input through the corresponding video input jacks.
V-AUX (V-AUX)
■
FM Mode (FM Mode)
Switches between stereo and monaural for FM radio reception.
Settings
Stereo (Stereo) Receives FM radio in stereo sounds.
Mono (Mono) Receives FM radio in monaural sounds.
100
En