Turning On/Off The Remote Control Sensor (Remote Sensor); Selecting The Remote Control Id (Remote Con Amp); Changing The Fm/Am Tuning Frequency Setting (Tuner Frq Step); Switching The Video Signal Type (Tv Format) - Yamaha Aventage RX-A1050 Owner's Manual

Turning on/off the remote control sensor
(REMOTE SENSOR)
DOCK SP IMP. - REMOTE SENSOR
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
ON
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
Turn on/off the remote control sensor on the main unit. While the remote control sensor
is turned off, you cannot control the unit from the remote control.
Settings
ON Turns on the remote control sensor.
OFF Turns off the remote control sensor.

Selecting the remote control ID (REMOTE CON AMP)

SP IMP. - REMOTE CON AMP
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
ID1
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
Change the unit's remote control ID so that it matches the remote control's ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
■
Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (e) and SCENE1 (BD/DVD) together for
3 seconds.
To select ID2, hold down the cursor key (e) and SCENE2 (TV) together for 3
seconds.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Changing the FM/AM tuning frequency setting
(TUNER FRQ STEP)
(Asia and General models only)
TUNER FRQ STEP
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
FM50/AM9
2 3 4
IN OUT 1 OUT 2
SLEEP
HD 3
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps
FM100/AM10
and AM by 10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps
FM50/AM9
and AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

SP IMP. - TV FORMAT
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
Switch the video signal type of the unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea and General models: NTSC
Other models: PAL
132
En
MUTE VOLUME
ADAPTIVE DRC
NTSC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR