Canon Booklet Trimmer-A1 Service Manual page 150

<Factory Setting for Trim Width (A3)>
1) Compute the reference value; e.g., {(A3: 420 mm/2) - 3.5 mm} ± 0.5 mm will be '206.5
± 0.5 mm'.
2) Feed paper in trim mode, and measure the width of the paper stack at its top and bottom.
3) (larger of the two: 208.8 mm) - (reference value: 206.5 mm) = 2.3 mm; thus, enter '2.3
mm' on the display control panel. (F00-204-01)
4) Feed paper once again in trim mode, and measure the paper stack at its top and bottom
to see that the larger of the two is 206.5 ± 0.5 mm. Otherwise, make adjustments using
the display control panel.
COPYRIGHT© 2002 CANON INC.
Paper stack
F00-204-03
PAPER SIZE:
TRIM WIDTH:
F00-204-04
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
208.8mm
208.6mm
<A3>
02.3mm
SERVICE MODE
S-9