Canon Booklet Trimmer-A1 Service Manual page 149

SERVICE MODE
<4. Adjust>
Selects the factory setting for the trim width.
Selecting a Paper Size/Making Adjustments
Selects a paper size for factory setting/adjustments.
• Trim Width Factory Adjustment Standard (As a rule, no adjustment in service mode is
needed.)
For each size (5 in total; LTRR, A4R, B4, A3, 11 × 17), paper will actually be moved in
trim mode; then, adjustments will be made with reference to A and B (F00-204-02) of a
stack of sheets (2 sheets of plain paper); i.e., so that the larger of the two will be in keep-
ing with the standard: {(paper dimension/2) - 3.5 mm } ± 0.5 mm.
(For specifics of adjustment, see F00-204-01).
• The range of factory settings for trim width is as follows; a shift is in reference to + and
- of the above diagram:
S-8
Folding face
Paper size (mm)
11 × 17 (279 × 432)
A3 (297 × 420)
B4 (257 × 354)
A4R (210 × 297)
LTRR (216 × 279)
COPYRIGHT© 2002 CANON INC.
A
Paper stack
B
F00-204-02
Shift (mm)
-2.5 to 2.5
-2.5 to 2.5
-2.5 to 2.5
-2.5 to 2.5
-2.5 to 2.5
T00-204-01
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
Trimming face
Shift interval: 0.1 mm