Line Appearances - Panasonic DBS 824 Installation Manual

,
Key Telephone Features Line Appearances
l
"CO TALK #XX" (where "xx" is the line number) appears on the
display.
2. Press the REDIAL key.
The last number dialed appears on the display.
3. Complete the call and replace the handset.
The line key LED changes from green to red and then goes off.
Considerations
l
If the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the REDIAL key at the busy tone. You can then redial the last
number dialed.
l
The Last Number Redial feature can redial a number up to sixteen digits
long.
l
A maximum of five Speed Dialing codes can be redialed.
Line Appearances
(CPC-S and CPC-M)
The DBS 824 provides up to four types of line appearances.
The following table summarizes how each type of line appearance is used:
Table 3-6. MC0 and ML key definifions
Key
Jlefiirition
-
DSS/BLF Appear-
DSS/BLF keys provide one-touch dialing, direct station selection
antes
(DSS), and busy lamp fields (BLF) for extensions.
1 Direct Line (DL)
1 DL keys are used to originate and receive calls over specific trunk
Appearances
Multi-CO (MCO)
1 Apuearances
Multi-Line (ML)
Appearances
numbers.
MC0 keys are used to originate a&receive CO calls.
ML keys are used to originate and receive CO lime calls and intercom
calls.
Issued 3/l /95
DBS 824-l O-700
3-47