LCR Add Tables
FF8
LCR Add Tables
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address:
FF8 8# (l-4)# (NNNNNNNNNNNNNNNN)#
Description
Digits to be added to dialed numbers, such as access codes, can be assigned to
trunk groups. When LCR uses a trunk in the group, it automatically adds the
digits to the beginning of the dialed number. After the digits are added, the
numbers are outpulsed.
Programming
To create an LCR Add Table . . .
FF8 8#
(l-4)#
(NNNNNNNNNNNNNNNN)#
/
t
LCR Trunk Group
Addition Digits
(up to 16 digits)
To clear an LCR Add Table . . .
FF8 8#
(114)# CONF ON/OFF
t
LCR Trunk Group
Related Programming
Outbound
DTMF Signal Duration for Auto-Dialed Digits:
FF2 (Trunk&
15# (l-3)#
Notes
Deletion First, Addition Next. If digits are being added and deleted from the
same
trunk group, the DBS will
delete digits fist, then add digits.
.
8-16
DBS 824-l O-400
l&d
3/l /95