Table of Contents
Advertisement
FFl
External Page Interface Control For Pacjng Groups
External Page Interface Control For Paging Groups
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address:
FFl .2# 4# (209)# (0 or l)#
Description
This setting determines whether a page is heard over an external page device
connected to the 824. This device is normally a loudspeaker installed in the
ceiling and connected to the 824 via the "EPA" phono-jack (for audio path)
on the CPC-S and CPC-IM cards. On the CPC-M card, a device can
also be
connected to the CN4 relay
terminals
labeled "AZ", "Zl", "Z2", "23" and
'5%" to control page zones. Also present on CN4 are relay terminals "M2",
"B2" and "C2", to which a general PA system can be connected.
In the 824 system, infernal paging is automatically performed -- all pages are
heard on the speakers of extension phones in the page group selected.
External paging, however, is controlled by the setting of this address. If
external paging is activated, an audio path is established via the "EPA"
phono-jack on the CPC card (for both CPC-S and CPC-M versions) whenever
a page is initiated. The following also happens in a CPC-M configuration: 1)
the "M2", " B2" and "CT relay terminals are activated when
any
page group
is selected for the page; and 2) the '55" relay terminals activate when their
associared
page group is selected (see table in address below).
F ogramming
Address
p;G~py-9vY
(0 "i l)#
Mnternal paging only.
(see table below)
l=Extemal and Internal paging
.
(see table below).
I
Pape
I If External Pa&z is activated W" sekcted above) -
'342". 'BT and
are activated.
CPC-M and CPC-S
Audio path is
estafAished via EPA
phmo-jack on the CPC
Card.
Related Programming
Page Group Extensions:
FF3 (ExtPort)# (18-25)#
(Oorl)#
EPI Audio Control (CPC-S Only): FFl 2# l#. 37# (0 or l)#
Issued 3/l/95
DBS
824-10-400
l-57
Advertisement
Chapters
Table of Contents
