USB Serial Commands
USB Serial
Scan one of the following codes to program the scanner to emulate a regular RS232-based COM Port. If you are using a
Microsoft® Windows® PC, you will need to download the USB serial driver from the Honeywell website
(www.honeywellaidc.com). The driver will use the next available COM Port number. Apple® Macintosh computers recog-
nize the scanner as a USB CDC class device and automatically use a class driver.
Scanning either of these codes also adds a CR and LF.
USB Serial Emulation for
Windows XP, Windows Server
2003, and later
USB Serial for Windows 2000
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
CTS/RTS Emulation On
* CTS/RTS Emulation Off
2 - 5