Connecting To A Lan; Connecting To The Internet; Connecting To A Wireless Lan - Sanyo VSP-SV2000 Instruction Manual

Network video server
Table of Contents

Advertisement

Connections

Connecting to a LAN

Use an Ethernet cable to connect the
ETHERNET connector of the video server to the
LAN's Ethernet switching hub.
Use a straight-type Ethernet cable.
PC
ON
1 2
MODEM
TERMI
ALARM
RS-232C
COM
A
B A B
RS485
ETHERNET
OUT
IN
OUT
IN
OUT
IN
VIDEO 2
VIDEO 3
Ethernet cable
(straight type)
Ethernet switching hub

Connecting to the Internet

Use an Ethernet cable to connect the
ETHERNET connector of the video server to a
device such as a router or ADSL modem that is
connected to the Internet.
If connecting to a router, use a straight-type
Ethernet cable. If connecting to an ADSL
modem or to some other type of device, refer
to the documentation provided with the
device for details on what type of connection
method should be used.
PC
MODEM
ON
1 2
TERMI
ALARM
RS-232C
COM
A
B A B
RS485
ETHERNET
OUT
IN
OUT
IN
OUT
IN
VIDEO 2
VIDEO 3
Ethernet cable
(straight type)
Router or ADSL modem
LAN
ALL RESET
OUT
VIDEO 4
Internet
ALL RESET
OUT
VIDEO 4

Connecting to a Wireless LAN

This video server can be connected to wired
LANs using an Ethernet cable, and it can be
connected to wireless LANS.
To connect the video server to a wireless
LAN, insert a wireless LAN card into the PC
CARD slot of the video server. You should
use only the recommended wireless LAN
cards and access points.
When a wireless LAN card has been
inserted into the video server, the wireless
LAN basically has priority, but if you change
the network address to a different setting,
you can also use the video server with a
wired LAN at the same time, so that if a
connection cannot be made to the wireless
LAN, you can check the settings using the
wired LAN instead.
(A) Inserting the wireless LAN card
Check that the wireless LAN card is facing the
right way, and then insert it into the PC card slot
until it locks into place.
(B) Removing the wireless LAN card
When you press the PC card eject button, the
card is unlocked, and it can then be pulled out.
POWER
(B)
Note: Consult the place of purchase for the
video server for details on obtaining a
recommended wireless LAN card.
– 8 –
(A)
Access point
LAN
English

Advertisement

Table of Contents
loading

Table of Contents