Table of Contents
Advertisement
Network Video Server Settings
In order to use the network video server, you must make the following settings in the order given.
When making network connection settings, the network settings must always be made first.
1
Installation of Plug-in Software (p. 11)
Use the accessory setup CD-ROM to set up the computer.
2
Computer and Video Server Connections (p. 14)
Connect the computer and the video server directly, and access the video server using the
computer's web browser.
3
Network Connection Settings (p. 16)
More than one video server can be connected to the same network, but before the video servers
can be connected, you need to make various settings for each video server such as assigning IP
addresses. The following three types of network connections can be made. Set the video servers
in accordance with the purpose of use.
A
NETWORK SET Settings (p. 17)
These settings are for when the video server is being connected to a LAN. This is the normal
type of connection to use for this video server.
B
WIRELESS LAN SET Settings (p. 19)
These settings are used when connecting the video server to an access point for a wireless
LAN.
C
PPP (dial-up) SET Settings (p. 21)
These settings are used when using a modem to connect the video server to the Internet.
Note: If using a modem to make a dial-up connection, you will need to use the Network Archiving
software that is sold separately.
– 10 –
English
Advertisement
Table of Contents
