Toro Greensmaster 3420 TriFlex Operator's Manual page 19

conjunction with the raise/lower mow control lever and the
reel speed control for backlapping the reels.
1
1. Backlap switch—backlap
position
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the generator status, the speed, and various
diagnostics and other information about the machine and the
battery pack. Figure 20 and Figure 21 illustrate the splash
screen and main information screen of the InfoCenter. You
can switch between the splash screen and main information
screen at any time by pressing any of the InfoCenter buttons
and then selecting the appropriate directional arrow.
2
1
13.2
10
1. Battery voltage
2. Power light/fault indicator
3. Engine RPM/status
4. Fault log
5. Generator voltage/status
2
Figure 19
2. Backlap switch—mow
position
3
4
52.2V
STOP
n/min
10,000.0
G017946
8
9
Figure 20
6. Glow Plug
7. Hour meter
8. Right button
9. Down button
10. Menu access/back button
1
2
G017943
1. Functional control status
2. Functional control status
•
Engine RPM/status—indicates the engine RPM.
•
Fault log—indicates that there is a current fault log to
review.
•
Generator voltage/status—indicates the generator
voltage.
•
Hour meter—indicates the total hours the machine has
operated. It starts to function whenever the key switch
is rotated to On.
•
PTO speed—indicates the PTO speed.
•
Glow plug—indicates that the glow plug is active.
•
Battery voltage—indicates the battery potential in Volts.
•
Coolant temperature—indicates the engine coolant
temperature in either °C or °F.
5
•
Functional control status—transport mode is indicated
by a rabbit and mow mode is indicated by a turtle.
6
•
Engine oil pressure light—this icon appears if the engine
oil pressure drops below a safe level.
•
Menu access/back button—press this button to access
7
the InfoCenter menus. You can use it to back out of any
menu you are currently using.
•
Down button—use this button to scroll down menus.
•
Right button—use this button to open a menu where a
right arrow indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
Using the Menus
To access the InfoCenter menu system, press the menu access
button while at the main screen. This will bring you to the
main menu. Refer to the following tables for a synopsis of
the options available from the menus:
19
1200 52.2V
170
100 240
n/min
1600
10,000.0
n/min
Figure 21
3. PTO speed
3
G017947