Signalling Protocol Settings - Panasonic KX-NT700 Operating Instructions Manual

Programming the Unit
Setting and Description
Default Gateway
Set this parameter to match the IP address of the IP
network's default gateway. See "IP Network Settings" in the
unit's Operating Instructions for more details.
This parameter is only available when [IP Address
Mode] is set to [Static].

Signalling Protocol Settings

Consult your system administrator for the appropriate settings.
Notice
•
It is necessary to restart the unit after changing these settings (see Page 59).
Setting and Description
SIP Ext. No.
Set this parameter to match the extension number
assigned to the unit through PBX programming.
SIP Password
Set this parameter to match the password assigned to the
unit through PBX programming.
SIP Proxy Server: User Domain Name
Set this parameter to match the IP address of the IP-PBX.
SIP Proxy Server: IP Address
Set this parameter to match the IP address of the IP-PBX
or SIP proxy server.
SIP Proxy Server: Port Number
Set this parameter to match the SIP port number of the
IP-PBX or SIP proxy server.
SIP Registrar Server: IP Address
Set this parameter to match the IP address of the IP-PBX
or SIP registrar server.
SIP Registrar Server: Port Number
Set this parameter to match the SIP port number of the
IP-PBX or SIP registrar server.
Hold Method
Determines the hold protocol used for the IP line.
•
If the other party cannot be put on hold, change this
setting.
64 Operating Instructions for Conferencing Phone Manager
Available Settings
—
Available Settings
Max. 32 digits
Max. 32 characters
—
—
1024–50999
—
1024–50999
RFC2543
RFC3264
Default Setting
0.0.0.0
Default Setting
—
—
—
0.0.0.0
5060
0.0.0.0
5060
RFC3264
Document Version 2010/02