Ip Network Settings - Panasonic KX-NT700 Operating Instructions Manual

Setting and Description
Flash Time
Determines the flash time.
Notice
•
Set this parameter to match the
specification of the TEL line.
Pause Time
Determines the length of the dialling pause
inserted when [REDIAL/PAUSE/
pressed on the unit.
TEL Line Level Reduction
Determines whether the incoming TEL line
signal level is reduced.

IP Network Settings

Consult your system administrator for the appropriate settings.
Notice
•
It is necessary to restart the unit after changing these settings (see Page 59).
Setting and Description
IP Address Mode
Determines whether the unit's IP address is assigned
automatically (DHCP) or manually (Static).
IP Address
Determines the unit's IP address. See "IP Network
Settings" in the unit's Operating Instructions for more
details.
This parameter is only available when [IP Address
Mode] is set to [Static].
Subnet Mask
Set this parameter to match the IP address of the IP
network's subnet mask. See "IP Network Settings" in the
unit's Operating Instructions for more details.
This parameter is only available when [IP Address
Mode] is set to [Static].
Document Version 2010/02
Available Settings
900 ms
700 ms
600 ms
400 ms
300 ms
250 ms
200 ms
160 ms
110 ms
100 ms
90 ms
80 ms
3 sec
] is 5 sec
On
Off
Operating Instructions for Conferencing Phone Manager
Default Setting
KX-NT700C: 700 ms
KX-NT700UK: 110 ms
KX-NT700AL: 110 ms
KX-NT700NZ: 600 ms
KX-NT700RU: 700 ms
KX-NT700BX: 700 ms
KX-NT700ML: 700 ms
KX-NT700NE:
Varies by the selection made for
the "Select Country" setting,
which is available when the unit
is turned on for the first time or
after "Reset All Data" is
used to reset the unit.
France: "250 ms"
All other: "110 ms"
Available Settings
DHCP
Static
—
—
Programming the Unit
3 sec
Off
Default Setting
Static
192.168.0.2
255.255.255.0
63