Step 2: Prepare For Express Setup; 2-1: Prepare Nec Express5800/Ft Series - NEC N8800-103F User Manual

Step 2: Prepare for Express Setup

Before starting Express Setup, be sure to do the following. If these preparations are not done, setup
cannot be performed properly.

2-1: Prepare NEC Express5800/ft series

With the power of NEC Express5800/ft series off, follow the steps below:
Prepare NEC Express5800/ft series.
1.
•
Mount the modules for both systems.
•
Insert only one hard disk to the Slot 1 of the CPU/IO module 0.
•
Remove all LAN cables.
•
Remove optional SCSI devices such as a tape device from the SCSI connector.
IMPORTANT:
Do not mount any hard disk into any slots of any modules unless specified. If multiple
hard disks are inserted, the hard disk to install OS cannot be determined.
Prepare the installation from the CPU/IO module 0.
2.
The location of the parts required for operations and check are shown below:
CPU/IO module 0
Power LED
CPU/IO module 0
Status LED
CPU/IO module 1
Power LED
CPU/IO module 1
Status LED
CPU/IO module 0
CPU/IO module 0
POWER switch
CPU/IO module 1
CPU/IO module 1
Power switch
Front side of device
Windows Setup 4-7
CPU/IO module 0
DISK ACCSSS LED
CPU/IO module 1
DISK ACCESS LED