Step 1: Things Required For Setup - NEC N8800-103F User Manual

4-4 Windows Setup
: Entered or selected by the user
: Proceeds automatically

Step 1: Things Required for Setup

The following explains the setup procedure using the Express Setup program:
IMPORTANT:
Because "Express Setup" formats the entire area of the disk used for installation, all
data on that disk will be deleted. If there is any data partition other than system
partition that contains OS on the disk for reinstallation, you must back up important
data in the data partition first and then start "Express Setup."
Do not apply service packs to NEC Express5800/ft series based on your judgment. If
you desire to apply service packs, contact your sales agent about application status
and apply service packs to NEC Express5800/ft series.
TIPS:
For the latest information on support for Windows Service Pack, contact your sales agent.
You need the following to install Windows Server 2003 R2 32-bit Enterprise Edition:
Startup CD-ROM
NEC EXPRESSBUILDER (CD-ROM)
ft Server Control Software UPDATE CD-ROM
This CD-ROM is used to update ft Server Control Software; it may not be shipped with the
equipment. (Not included if "NEC EXPRESSBUILDER" CD-ROM contains the latest
version of software programs at the time of shipment.)
Microsoft® Windows Server™ 2003 R2 32-bit Enterprise Edition Disk1
(hereinafter referred to as "Windows Server 2003 CD-ROM")
Microsoft® Windows Server™ 2003 R2 32-bit Enterprise Edition Disk2
Windows Server 2003 Service Pack CD-ROM
It is recommended to apply the latest service pack supported by ft Server.
User's Guide (Setup) (this manual)
Step 15: Back up System Information (P.4-49)
Setup completed