Table of Contents
Advertisement
TIPS:
Core nuts (8 pieces) are not included. Use the core nuts that are attached to the rack.
1.
If the rack has front and rear doors, read the instruction that comes with the rack, and open
them.
2.
Install the brackets from the rear side of the rack. Install the brackets with its flat side facing
inside. Place them with the round screws with washers that come with the device
symmetrically (total: 4). Fasten the screws tentatively not tightly.
4U
(top of device)
3U
2U
1U
Bottom of
device
Round screws with washers
Bracket (flat sides are facing inside)
Installing Server 3-7
Advertisement
Table of Contents
Troubleshooting
