Bad Parity On Uncorrectable Err; Serr# Output Type; Serr# Duration Mode; Power Management Setup - Motorola CPV5000 Installation And Reference Manual

Bad parity on uncorrectable err

This option is not available unless the DRAM data integrity mode is set to
ECC.

SERR# output type

This controls the output driver of the SERR# pin. This should be set to Open
Drain when used in a PCI system.

SERR# duration mode

This should be set to Pulse (NMI) for correct CPV5000 operation.

Power Management Setup

Power Management Setup options are displayed by choosing the power
management icon from the WINBIOS Setup main menu. All Power
Management Setup options are described in this section.

Power management

Set this option to Enabled to enable the power management and Advanced
Power Management (APM) features. The settings are Enabled or Disabled.

Instant on support

Set this option to Enabled to allow the computer to go to full power on mode
when leaving a power-conserving state. This option is only available if
supported by external computer hardware. AMIBIOS uses the RTC Alarm
function to wake the computer at a specified time. The settings are Enabled or
Disabled.

Green PC monitor power state

This option specifies the power management state that the Green PC-compliant
video monitor enters after the specified period of display inactivity has
expired. The settings are: Disabled, Off, Standby, or Suspend.
WinBIOS Setup types
7-19
7