Partition Name Settings; Figure 3.26 Example Of [Partition Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)

3.4.4 Partition name settings

Administrator privileges are required to set partition name. Fujitsu recommends using host name for partition name.
Operations
1. Click [Partition]-[Partition Configuration]
2. Select partition which sets the partition name and enter the partition name in [Partition name] cell.
Remark
The name can be input up to 16 characters. The characters that can be used are as follows.
[0-9], [a-z], [A-Z], half-width space, # (Sharp), _ (Underline), and – (Hyphen)
3. Click [Set Partition Name] button.
 Name is set for the selected partition.
Example of [Partition Configuration] Window
FIGURE 3.26
41
CA92344-0536-04