Storage Of Bios Configuration Information; Figure 5.18 Example Of [Backup Bios Configuration] - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 5 Work after Operating System installation
5.7 Saving management and configuration information
2. Click [Backup] button
→ Storage location dialogue box of browser is displayed.
3. Select the storage pass and click the [OK] button
→ Downloading of configuration information file is started.
Initial file of the MMB configuration information for back-up is as follows.
MMB_ (Date on which the backup of the file taken)(MMB version).dat

5.7.2 Storage of BIOS configuration information

This section describes the method for taking the backup of the BIOS configuration information on a remote PC.
[Maintenance] menu in MMB Web-UI is used for storing the BIOS configuration information.
Operations
1. Select the [Maintenance]-[Backup/Restore Configuration]-[Backup BIOS Configuration]
→ [Backup BIOS Configuration] window is displayed.
2. Select the radio button of partition which takes the backup of configuration information, and click [Backup] button.
→ Dialogue box which specifies the storage location, is displayed.
3. Select the storage pass and click [OK] button.
Initial file name of the BIOS configuration for back-up is as follows.
Partition number_ Date on which the backup of the file is taken_(BIOS version).dat
Example of [Backup BIOS Configuration]
FIGURE 5.18
101
CA92344-0536-04