Https Settings; Schedule Operations; Figure 6.11 Example Of [Network Protocols] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 6 Work after installation

6.6 Schedule operations

6.5.4 HTTPS Settings

The HTTPS of MMB is set. It can be set by using Administrator privileges.
To [Enable] the HTTPS, it is necessary to register a valid SSL certificate. When the valid SSL certificate is not registered
and when it is attempted to [Enable] the HTTPS, error is displayed.
For the valid SSL certificate, specify the "attested certificate" or "self-attested certificate" that is generated on MMB window.
There are cases where HTTPS is already set by our engineers. If the changes are not required, skip the HTTPS settings
and proceed to the next settings.
Operations
1. Click [Network Configuration] – [Network Protocols].
[Network Protocols] window is displayed. For details about the [Network Protocols] window, see "1.5.4 [Network
Protocols] window" of the PRIMEQUEST 2000 Series Tool Reference (CA92344-0539).
2. Set the items related to HTTPS of [HTTP].
3. Click the [Apply] button.
6.6 Schedule operations
For details about the schedule operations, see "9.3 Schedule operations" of the PRIMEQUEST 2000 Series Administration
Manual (CA92344-0537).

FIGURE 6.11 Example of [Network Protocols] window

115
CA92344-0536-04