Setup Of Dump Environment (Windows); About Memory Dump File/Paging File; Figure 5.16 Main Menu (Sadump) - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 5 Work after Operating System installation

5.4 Setup of dump environment (Windows)

16. Select [Exit], and press [Enter] key
→ The action returns to the main menu (sadump)
17. Select [Exit], and press [Enter] key
→ Setting of sadump is completed.
5.4 Setup of dump environment (Windows)
Windows OS provides memory dump function as standard. For obtaining the dump, it is necessary to secure the disc area
in advance.
For details regarding the setup of dump environment, see "11.4.3.Setup of dump environment (Windows)" of
PRIMEQUEST 2000 Series Administration Manual (CA92344-0537).

5.4.1 About memory dump file/paging file

Memory dump file stores the debug information when STOP error (Fatal system error) occurs in the system. Settings for
obtaining the memory dump are done after installing the operating system to be used in the operation or after installing the
application.
The paging file is created in the hard disk to temporarily secure the memory area which has not been used. Paging file is
also used at the time of creating the memory dump file. At the time of creating the memory dump file, entire memory dump
information is stored temporarily in the paging file.
For the details regarding the memory dump file and paging file, see "11.4.3.Setup of dump environment (Windows)" of
PRIMEQUEST 2000 Series Administration Manual (CA92344-0537).
Main Menu (sadump)
FIGURE 5.16
97
CA92344-0536-04